Please wait...

Loading..

V3 Demonstration Board

NebuLinkNode Image
Description

Introduction

V3 Demonstration Board is a convenient system designed to enable users to develop their specific use cases and make a complete working prototype.

It contains components that can be used to form a ZigBee or 6LowPAN node based on Nebulae framework.

It demonstrates the ability to utilize one of the multiple energy sources to power a wireless sensor node containing the RF SoC module, multiple IOs, LEDs, Push Button, etc for specific needs.


Enquiry
JN5169 module
GPIO interface headers
Buffer circuit for analog input
USB Micro port for power input
U.FL connector for external antenna
Single relay (DPDT) output with capacity of 230VAC, 180mA
Power ON-OFF switch
User-input button (connected to DIO2 of module)
1 green and 1 red LED for debug purposes (connected to DIO4 and DIO5 of Module)
Powered from one of the following:

- 2 AA batteries on the board
- External 0-6V DC supply
- From USB Micro connector
Operating temperature -10°C to +50°C
Operating humidity Up to 85% non-condensing
Dimensions 79mm x 45mm x 10mm (L x W x H)